PFAFF® Multi-Function Foot Control

• Three different strengths of lens allows you to choose the correct level of magnification for needle threading, detailed sewing i.e. stitch in ditch.
• Swivel-out holder allows you to move the magnifier out of the way temporarily without having to remove it from the holder
• The lenses are held in place by a magnet, making them easy to attach and remove

Specifying the Sewing Functions

By default, no function is set to the three editable controls. When you connect the Multi-Function Foot Control to your machine, a pop up window will open on the screen where you can specify your settings. The control settings can also be accessed anytime from the settings menu, when the foot control is connected. When you disconnect the control from the machine, your settings are stored until the next time you connect it.

Connecting the Foot Control

The Multi-Function Foot Control is USB-powered. No power cord or batteries are needed.

1. Disconnect the original foot control from the machine, if connected.
2. Connect the USB cable (type A) to the USB socket on the bottom right side of the machine.
3. Connect the USB cable (type B) to the USB socket at the front of the foot control.

Specifying Settings

To specify a function, touch the button of the control you want to set and select the desired function in the drop-down list.

To close the pop up window, touch OK.

Reverting to Default Settings

To remove the assigned function from a control, touch the button of the control and select No function assigned in the drop-down list.

To set all editable functions to default settings (No function assigned), select Reset.