How to Blind Hem

Creating a skirt or hemming a pair of jeans? A blind hem, also known as the invisible hem, is nearly invisible from the right side of the fabric, making it perfect for skirts, dresses, trousers, curtains, etc. 

How to Blind Hem

Machine Settings: 

• Presser Foot: Blind Stitch Foot
• Thread Tension Control: Auto

Regular Blind Stitch for Normal Fabrics - Regular blind stitch for normal firm fabrics

Elastic Blind Stitch for Soft, Stretchable Fabrics - Elastic blind stitch for soft, stretchable fabrics

Directions:

1. First finish the raw edge. Do this by turning it under on fine fabrics or overcasting it on medium to heavyweight fabrics. Then turn the hem up the required depth, press and pin in place.
2. Now fold the fabric as illustrated with the wrong side up. 
3. Place the fabric under the foot. Turn the handwheel towards you by hand until the needle swings fully to the left. It should just pierce the fold of the fabric. If it does not, adjust the guide (B) on the Blind Hem Foot (A) so that the needle just pierces the fabric fold and the guide just rests against the fold. NOTE: For a narrower or wider blind hem, first manually adjust the length and width controls to your desired length and width. Then adjust the guide on the foot. Sew slowly, guiding the fabric carefully along the edge of the guide. 
4. When completed, the stitching is almost invisible on the right side of the fabric. 

NOTE: It takes practice to sew blind hems. Always make a sewing test first.