Husqvarna® Viking® Adjustable Bias Binder

sku 412985045

$16.00 Off

Haga hermosos acabados de borde con su cinta de bies favorita. Ajustable para adaptarse a cintas de bies en diferentes anchos, de ¼" (6 mm) a ¾" (20 mm).

Envío gratis en pedidos de $75 o más. (No incluye AK y HI)

Earn 36 rewards points with the purchase of this product Sign in or Sign up

Machine Compatibility

What is my Machine Letter

You may also need


Make beautiful edge finishes with your favorite bias tape. Adjustable to fit bias tapes in different widths, from ¼” (6 mm) to ¾” (20 mm).


How to Use:
1. Thread with sewing thread on top and in the bobbin.

2. Snap on the Adjustable Bias Binder.

3. Use the screw on the right side of the bracket to adjust the width of the opening to fit the bias tape.

4. Cut the end of the bias tape to a 45 degree angle. Insert the bias tape from the outside of the bracket, into the slot that matches its width, and pull it down under the foot.

5. Place the edge to be bound into the groove on the left side of the bracket.

6. Loosen the screw on the top, in the back of the foot and adjust the bracket as needed.

7. Select a narrow zigzag, a straight stitch or a decorative stitch. Sew slowly, keeping the fabric to be bound, snugly in the groove as you sew.


Not for EMERALD™ series

Características adicionales
  • La cinta al bies se introduce en la guía de desplazamiento frontal del unidor
  • La tela se coloca en la ranura del unidor, entre medio de los bordes de la cinta al bies
  • La cinta al bies unirá el borde de la tela automáticamente mientras cose