Instructions:
1. Cut a piece of Fusible No-Show Mesh large enough to fit in hoop (hoop dimension plus at least 1” on all four sides). The shinier side of No-Show is the fusible side.
2. Position the fusible side on the wrong side of fabric area for embroidery.
3. Fusible No-Show Mesh irons on with the iron set between medium and high. (Use appropriate heat for type of fabric being ironed.)
4. Press to fuse in place. Since this will be peeled back when completed, it does not require a permanent bond.
5. Position fabric and stabilizer in hoop.
6. Hoop fabric; tighten without pulling or stretching.
7. If needed, add a second layer of No-Show Mesh or a light tear away for the higher stitch count designs.
8. Stitch the embroidery.
9. When the embroidery is finished, trim away excess No-Show Mesh, leaving about ¼” on outside edge of embroidery design.
Follow fabric recommendations for machine washing, dry cleaning and pressing.