PFAFF® Dissolve-a-Way Max Stabilizer 12" x 10 Yards

sku 821415096
$55.99 MSRP
Maximum Heavy-Weight Water Dissolvable Film Topping For Heavier Stitch Counts

PFAFF® Dissolve-A-Way Max is our maximum heavy-weight water dissolvable film topping for heavier stitch counts or heavier thread weights or for stabilizer-only hoop embroideries.

Limited time! Free Shipping on all orders.

Earn 55 rewards points with the purchase of this product Sign in or Sign up


Recommended uses:

Dissolve-A-Way Max used as topper is used on high nap or loft pile fabrics and heavier weight thread stitching on high nap. It’s a must for heavier weights of terry cloth, corduroy, and fleece. Heavy stitch count or heavier weight threads require a heavier topper weight to maintain coverage. Use as stabilizer-only in the hoop for high stitch count or heavier thread weight lace embroidery, multiple or heavier weight fabric layer appliqué, or 3-D thread/yarn with high density of filled or decorative stitching.


As topper:

Method One is to place Dissolve-A-Way Max on top of fabric then hoop normally and embroider.

Method Two is to hoop fabric first, place a piece of Dissolve-A-Way Max on top, secure with basting stitch before beginning embroidery process.

As a Stabilizer:

For higher stitch count lace designs, heavier thread weights, appliqué or 3-D texture piece, hoop 1-2 layers of Dissolve-A-Way Max stabilizer. Pull stabilizer edges gently to tighten and secure in hoop. Be careful not to stretch film as you tighten.

When completed, tear away as much of the film as possible.

Removal of the remainder is best in a warm water bath, soaking for 10 minutes. Move around continuously. Repeat until completely removed. Rinse in warm water.

Dissolve-A-Way Max can be removed also by medium to heavy steam, or moisten and blotted away with a wet sponge.

Place item on flat surface until thoroughly dry.