Save 20%

HUSQVARNA® VIKING® Changeable 1/4 Inch Guide Foot

sku 413238345
HUSQVARNA® VIKING® Changeable 1/4 Inch Guide Foot -- Product Image
HUSQVARNA® VIKING® Changeable 1/4 Inch Guide Foot -- Product Image
HUSQVARNA® VIKING® Changeable 1/4 Inch Guide Foot -- Product Image HUSQVARNA® VIKING® Changeable 1/4 Inch Guide Foot -- Product Image
$44.99

$55.99

Find a Store

Free standard shipping on orders over $49

Free 30-day returns

Buy now, pay later and special financing available

The Interchangeable Dual Feed with changeable presser feet is designed to feed layers of fabric and/or batting evenly. It is perfect for quilting, sewing velvet, some stretch fabrics, imitation leathers and fabrics which need accurate pattern matching.
Details

The Interchangeable Dual Feed with Changeable Presser Feet is designed to feed layers of fabric and/or batting evenly. It is perfect for quilting, sewing velvet, some stretch fabrics, imitation leathers and fabrics which need accurate pattern matching. Use the Changeable ¼” Guide Foot for straight stitch and hand look quilt stitch. The guide will help you keep ¼” (6mm) distance.

 

Compatible for the following HUSQVARNA® VIKING® machine groups: 5,6,7,8.

 

*Not for EMERALD™ 122, 118, 116 machines, EDEN ROSE™ 250M, TRIBUTE™ 140M, 145M, ONYX™ series.

 

Specifications

How to Use:

1. Attach the Interchangeable Dual Feed to your machine:
a. Remove the presser foot ankle by unscrewing the ankle screw.
b. Place the Interchangeable Dual Feed onto your machine from the back, positioning the fork over the needle clamp screw. Screw the Interchangeable Dual Feed onto the presser foot bar with the presser foot ankle screw.
c. With presser foot bar in the up position, place the Changeable 1/4” Guide Foot under the Interchangeable Dual Feed.

2. Push the Changeable ¼” Guide Foot upwards so that it snaps into place.

Piecing:

3. Because this foot has a small opening to better form the stitches for piecing, you can only use the center needle position straight stitch or the hand look quilt stitch.

4. To begin sewing at the edge of the fabric, place your fabric under the foot, aligning the raw edges with the guide on the foot.

5. Sew the seam, keeping the edges aligned with the guide.

Quilting:

6. The red markings on the foot will help you to align the fabric at the start of your sewing, at corners and at the end of your fabric.

7. Sew with the guide riding in the pieced seam (ditch) of the quilt. When you come to a corner, stop when the ¼” red marking on the foot reaches the seam.

8. With the needle in the fabric, pivot and continue sewing.

Shipping & Returns

Shipping

  • Free standard shipping on orders over $49
  • Orders under $49 ship for $11.99
  • Most orders arrive within 3–5 business days
  • Expedited shipping options are available at checkout


For full details, please see our Shipping Policy

Returns

  • Free returns up to 30 days


For more information, please visit our Returns Policy

Machine Compatibility

Not for EMERALD™ 122, 118, 116, EDEN ROSE™ 250M, TRIBUTE™ 140M, 145M, ONYX™ series

Frequently Asked Questions - HUSQVARNA VIKING Changeable 1/4 Inch Guide Foot

This foot is designed primarily for quilters to sew a perfect, scant 1/4 inch seam allowance, which is critical for accurate quilt piecing.

This foot is part of a "changeable" system where you use one ankle and snap on different soles. This listing is for the 1/4 inch guide foot sole itself.

This foot requires the Changeable Presser Foot Ankle and is compatible with specific machine groups. Please verify that you have the required ankle and that your machine is compatible.

The metal guide on the right side of the foot runs along the edge of your fabric, preventing you from wavering and ensuring a consistent seam allowance every time.

While it's a must-have for quilters, it's also perfect for any project requiring a precise narrow seam, such as constructing doll clothes or heirloom garments.