Product quantity cannot be greater than 99
The Open Toe Free Motion Spring Foot gives clear visibility when doing free motion quilting or embroidery. Because of the open front, you can easily do stippling or follow a design in the fabric. The spring action keeps the fabric from lifting with the needle as the stitch is being formed which helps eliminate thread breakage with specialty or heavier threads. Be sure to use the appropriate needle for the thread you are using.
See How-To instructions below.
Designed for the following Husqvarna VIKING machines:
DESIGNER EPIC™, EPIC™ 980Q
DESIGNER DIAMOND™ series
DESIGNER RUBY™ series
DESIGNER TOPAZ™ series
OPAL™ 690Q, 670, 650
EDEN ROSE™ 250C
TRIBUTE™ 140C, 145C
DESIGNER™ SE, SE Limited Edition
DESIGNER™ 1, 2
QUILT DESIGNER™, QUILT DESIGNER™ 2
PLATINUM™ Plus, 955E, 950E, 775, 770, 755 Quilt, 750 Quilt, 730, 715
ROSE™ 605, 600
LILY™ 555, 550, 545, 535, 530
INTERLUDE™ 445, 435
FREESIA™ 425, 415
SCANDINAVIA™ 400, 300, 200 500, 400, 350, 100, 250, 230, 225/215, 210, 205
PRELUDE™ 360, 340
DAISY™ 335, 330, 325, 320, 315, 310
For Sapphire series, select Free Motion Spring Action on the Set Menu.
For DESIGNER™ series, select Sensor Q Foot on the Set Menu.
1. Remove the ankle and put on the Open Toe Free Motion Spring Foot.
2. Bring the bobbin thread to the top by taking one stitch.
3. Lower the presser foot.
4. Sew, moving the fabric as desired to quilt the fabric, or create a free motion design. Move the fabric in a smooth motion, moving the fabric faster as the speed of the machine is increased. You are creating the length of the stitch as you move the fabric.